These 8 floppy image's contain almost complete support
for getting all your hardware going on a Intel i386/i486/i586/i686
Pentium Pro and Pentium II system. Network, SCSI , filesystem and
PCMCIA support is included. I use these images always first
when I get a new Intel system in front of me.


cdboot.img   :  Can be used to make bootable Eltorito CDROM using
		the FD 2.88 Mb floppy emulation. Take benefit of it.
		Just use mkisofs with eltorito support to include this
		image as the boot image.
		cdboot.img actually boots boot2036.img and loads
		rootrh51.img using initrd. Works quite nice.
boot2036.img :	the boot floppie, boots linux kernel 2.0.36
root42.img :	comes next and loads a redhat 4.2 runtime as a ram
		disk. It needs at least 8 Mb RAM. If you have only
		8 Mb RAM and want to use the support images, then
		for instance mount first a filesystem (e.g. msdos)
		and install a swapfile :

		login as root, no password required :)

		# mount -t msdos /dev/hda1 /mnt
		# dd if=/dev/zero of=/mnt/swapfile bs=1024 count=8192
		# mkswap /mnt/swapfile 8192
		# sync
		# swapon /mnt/swapfile

rootrh51.img :	is the same as root.img but loads a full featured
		redhat 5.1 runtime as a ramdisk. You can just use
		rootrh51.img together with the other images. 
		It has the same functionality as root.img but with
		the following additional features :

		vim
		ftp
		ps
		rlogin
		telnet (tiny telnet)
		color-ls
		complete e2fsprog kit 

		This image already contains its insmod end rmmod binary's
		and uses glibc2 (libc6).


suppnet.img :	contains modules to load :
		
		- network cards : 

3c501.o        bpqether.o     eql.o          ni52.o         smc-ultra32.o
3c503.o        bsd_comp.o     eth16i.o       ni65.o         smc9194.o
3c505.o        de4x5.o        ewrk3.o        pcnet32.o      soundmodem.o
3c507.o        de600.o        fmv18x.o       pi2.o          strip.o
3c509.o        de620.o        hdlcdrv.o      plip.o         tlan.o
3c515.o        depca.o        hp-plus.o      ppp.o          tulip.o
3c59x.o        dgrs.o         hp.o           pt.o           via-rhine.o
8390.o         dlci.o         hp100.o        rcpci.o        wavelan.o
ac3200.o       dummy.o        ibmtr.o        rtl8139.o      wd.o
apricot.o      e2100.o        lance.o        sdla.o         yellowfin.o
arcnet.o       eepro.o        mkiss.o        shaper.o
at1700.o       eepro100.o     ne.o           slhc.o
atp.o          eexpress.o     ne2k-pci.o     slip.o
baycom.o       epic100.o      new_tunnel.o   smc-ultra.o


suppfs.img :	contain modules to load :

		- filesystems :

affs.o           nls_cp855.o      nls_cp874.o      nls_koi8_r.o
autofs.o         nls_cp857.o      nls_iso8859_1.o  smbfs.o
ext.o            nls_cp860.o      nls_iso8859_2.o  sysv.o
hpfs.o           nls_cp861.o      nls_iso8859_3.o  ufs.o
ncpfs.o          nls_cp862.o      nls_iso8859_4.o  umsdos.o
nls_cp437.o      nls_cp863.o      nls_iso8859_5.o  vfat.o
nls_cp737.o      nls_cp864.o      nls_iso8859_6.o  xiafs.o
nls_cp775.o      nls_cp865.o      nls_iso8859_7.o
nls_cp850.o      nls_cp866.o      nls_iso8859_8.o
nls_cp852.o      nls_cp869.o      nls_iso8859_9.o

		- cdrom drivers (non-scsi and non-atapi) :

aztcd.o      cdu31a.o     gscd.o       mcd.o        optcd.o      sjcd.o
cdrom.o      cm206.o      isp16.o      mcdx.o       sbpcd.o      sonycd535.o

		- IPV4 :

ip_alias.o         ip_masq_irc.o      ip_masq_vdolive.o
ip_masq_cuseeme.o  ip_masq_quake.o    ipip.o
ip_masq_ftp.o      ip_masq_raudio.o   rarp.o


suppscsi.img :	contains modules to load :

		- SCSI cards :

53c7,8xx.o    aha1542.o     eata_pio.o    ncr53c8xx.o   t128.o
AM53C974.o    aha1740.o     fdomain.o     pas16.o       tmscsim.o
BusLogic.o    aic7xxx.o     g_NCR5380.o   ppa.o         u14-34f.o
NCR53c406a.o  dtc.o         gdth.o        qlogicfas.o   ultrastor.o
advansys.o    eata.o        in2000.o      qlogicisp.o   wd7000.o
aha152x.o     eata_dma.o    megaraid.o    seagate.o


suppmisc.img :	contains modules to load :

		- Misc drivers (o.a. isdn)

appletalk.o   capiutil.o    ftape.o       ktti.o        pd.o
aten.o        comm.o        hisax.o       lp.o          pf.o
atixlmouse.o  cyclades.o    icn.o         misc.o        pg.o
ax25.o        dstr.o        ipx.o         msbusmouse.o  psaux.o
b1pci.o       epat.o        isdn.o        netrom.o      rose.o
bpck.o        epia.o        isdnloop.o    on20.o        sc.o
busmouse.o    fit2.o        isicom.o      on26.o        scc.o
capi.o        fit3.o        kbic.o        pcbit.o       specialix.o
capidrv.o     frpw.o        kernelcapi.o  pcd.o


pcmcia.img :	contains PCMCIA stuff and util binary's 
		for redhat42 en redhat51:

-rwxr-xr-x   1 root     root        56544 Apr 14 00:28 find*
-rwxr-xr-x   1 root     root        24324 Apr 14 00:29 more*
drwxr-xr-x   6 root     root         1024 Apr 20 17:56 pcmcia/


Getting the network going :

1. # mkdir /usr/tmp
2. # vi /etc/hosts		(plug in your ip numbers 
				 and host names)
3. mount suppnet.img :
   # mount /dev/fd0 /floppy
   # cd /floppy/sbin
   # cp insmod /sbin		(only for redhat42 runtime)
   # cd /etc/sysconfig/network-scripts
   # cp ifcfg-eth0.org ifcfg-eth0
   # vi ifcfg-eth0		(plug your ip number and netmask
				 and broadcast address)
   # cd /floppy/modules/net
   # insmod 3c509.o		( if your NIC is such a card )
   # cd /etc/rc.d/init.d
   # ./network stop ; ./network start
   # ping hostname		( ping some host on the network )

Getting SCSI going :

1. mount suppscsi.img :
   # mount /dev/fd0 /floppy
   # cd /floppy/sbin
   # cp insmod /sbin		(only for redhat42 runtime)
   # cd /floppy/modules/scsi
   # insmod aic7xxx.o		( if you have a aha2940 scsi card)

Getting PCMCIA going :

1. mount pcmcia.img :
   # mount /dev/fd0 /floppy
   # cd /floppy/redhat51/pcmcia
   # cp -ap * / &
	check youre /etc/sysconfig/pcmcia config file
   # /etc/rc.d/init.d/pcmcia start

Getting FAT32 going :

1. mount suppfs.img :
   # mount /dev/fd0 /floppy
   # cd /floppy/sbin
   # cp insmod /sbin		(only for redhat42 runtime)
   # cd /floppy/modules/fs
   # insmod nls_cp437.o
   # insmod nls_iso8859-1.o
   # insmod vfat.o
   # mount -t vfat /dev/hda1 /mnt  ( If hda1 contains a FAT32 filesystem)

Getting XXX going :

   E-Mail me at stock@sba.nl or at stock@InfoMagic.NL

Robert M. Stockmann
Support Infomagic NL VOF
Last changed Thu Dec 17 14:18:32 MET 1998